Details
These are made in England from flexible, triple laminated plastic.
What is it for?
If you have a chimney which is disused, or only used very occasionally, a Chimney Balloon is an easy to fit solution. By ‘plugging’ the chimney at the fireplace end, draughts and cold air caused by the suction effect of the chimney are greatly reduced. The shape of the design means that when correctly fitted nominal ventilation is still present allowing the chimney to breathe.
Caution – Fires lit while product is still inside the flue will melt the balloon.
What sizes & options are available?
A Chimney Balloon will fit into the throat of a chimney with internal dimensions between 15” by 9” right up to internal dimensions 36” by 15 “. These dimensions should be carefully measured about a foot above the fireplace opening. If in doubt then the size slightly larger is the correct one to order.
A chimney balloon is available in three sizes – Small (15” by 9”), Medium (24” by 12“), & Large (36” by 15”).
How do I fit one?
It is fitted by manually inserting into the chimney about a foot above the fireplace opening. The Chimney Balloon is then inflated using either an Inflation Tube, an electric pump or manual pump (detailed instructions are provided). The chimney balloon can be removed carefully and re-used if a fire is to be lit.
What if it won't fit?
We are sorry but Chimney Balloons are only available in the sizes mentioned above. However we have a range of Birdguards and Chimney cappers that protect your unused chimney. Have at a look at our other products or call or email us for advice.